In the monsoon, fasteners that are coated or made for wet conditions keep their strength; plain or thinly plated steel starts to rust within weeks. For roofing, outdoor MEP, façades and boundary work, pick corrosion-resistant screws, hot-dip galvanised or stainless rods, and seal every penetration.

What the monsoon does to fasteners
- Constant moisture strips thin zinc plating quickly
- Water collects in drilled holes and around washers
- Rust weakens the thread and the head, and stains façades
- Swelling and drying cycles loosen fixings in roofing sheets
Fasteners that hold up
Coated self-drilling screws for roofing and cladding
Corrosion-resistant coated screws, such as Corroshield, are made for metal roofing and cladding exposed to rain.
Hot-dip galvanised or stainless rods for anchors
For outdoor anchors, use hot-dip galvanised rods, or stainless A4 / 316 for wet and coastal areas. Read which threaded rod to use with chemical anchors.

Chemical anchors to seal the hole
Resin fills the drilled hole, which keeps water away from the rod.
Monsoon checklist
- Check the exposure: indoor, outdoor or coastal
- Match the coating or steel grade to that exposure
- Use sealing washers on roofing screws
- Never mix stainless and plain steel parts in one joint
- Inspect fixings after the first heavy rains
More on this: how to protect fasteners from rust outdoors, why fasteners fail from corrosion and why corrosion protection matters on every site.
Get monsoon-ready fasteners
Fasteners King has supplied anchors and fixings since 1979. We are India’s No. 1 Fischer channel partner (5 years in a row) and an Authorised Hilti Channel Partner, with stock in Delhi, Guwahati and Dubai. We are also the authorised distributor for Corroshield in India. See our Corroshield fasteners.