Hilti logoAuthorised Hilti Channel Partner

Hilti HIT-RE 500 V4 Epoxy Chemical Anchor in Delhi

Hilti’s top-performance epoxy injection mortar for post-installed rebar and heavy structural anchoring – genuine stock at our Chawri Bazar, Delhi branch.

How many cartridges do you need? Use the free chemical volume calculator →

✔ Genuine stock at Chawri Bazar, Delhi  ✔ GST invoice  ✔ Mon–Sat, 11 am – 7 pm

Hilti HIT-RE 500 V4 Epoxy Chemical Anchor – Delhi
🏗️Rebar & heavy structural anchoring
✅ETA approved – incl. seismic C1/C2 & fire
💧Wet, water-filled & diamond-cored holes
🌿Styrene-free epoxy
📦330 ml & 500 ml packs

Where to use Hilti HIT-RE 500 V4

  • Post-installed rebar
  • Slab & wall extensions
  • Column & staircase starters
  • Steel baseplates & columns
  • Retrofitting & strengthening
  • Cracked concrete anchoring
  • Natural stone

Hilti HIT-RE 500 V4 – sizes & technical data

TypeInjectable epoxy mortar
Pack sizes330 ml and 500 ml foil packs
Use withHilti threaded rods (HAS / HIT-V), HIS-N internally threaded sleeves, rebar
Base materialConcrete (cracked & non-cracked), natural stone
Hole conditionDry, wet, water-filled, diamond-cored
ApprovalsETA for anchoring and post-installed rebar; seismic, fire and fatigue
In-service temperature−40 °C to +75 °C
Storage5 °C to 25 °C

Technical data as published by Hilti. Always design to the current approval and datasheet.

Pairs well with

Hilti HIT-V anchor rod
Hilti HIT-V anchor rod
Hilti HDM dispenser
Hilti HDM dispenser

Why buy Hilti HIT-RE 500 V4 from Fasteners King, Delhi

Since 197946+ years in fasteners
12,000+customers served
7,000+projects supplied
98.4%on-time dispatch

Authorised Hilti Channel Partner. Genuine stock with GST invoice, supplied across Delhi NCR (Gurugram, Noida, Faridabad, Ghaziabad), Haryana, Uttar Pradesh, Rajasthan, Madhya Pradesh and Jammu & Kashmir.

DLF logoM3M logoSOBHA logo
Fasteners King store, Chawri Bazar, Delhi

More from our Delhi branch

FAQs

Can HIT-RE 500 V4 be used for rebar?

Yes. It is ETA-assessed for post-installed rebar connections, including fire and seismic conditions. Size and embedment should follow the approval or a PROFIS Rebar design.

How is it different from Fischer FIS EM Plus?

Both are top-end epoxy mortars for heavy loads and rebar. Choice usually depends on the project specification and approval required – WhatsApp us your drawing and we will suggest the right one.

Do you give a GST invoice?

Yes, every order from our Delhi branch comes with a GST invoice.

Fasteners King – Delhi branch

3438, 1st Floor, Chowk Hauz Qazi, near Chawri Bazaar Metro Station (Gate 2), Delhi 110006

📞 +91 90057 00569 · +91 89058 90569 · ✉️ Rahul@FastenersKing.com

🕘 Mon–Sat, 11 am – 7 pm (closed Sunday)