Rebar Anchoring Chemical in Guwahati

Adding a slab, extending a column or fixing starter bars into old concrete? Post-installed rebar is set with an epoxy injection mortar. Fasteners King stocks the epoxies that rebar contractors and structural consultants ask for, in Guwahati. We supplied Fischer FIS EM Plus to an NCC project.

Epoxyfor rebar and heavy loads
GST invoiceon every order
24 hrsdispatch from PO*

*Subject to stock availability.

Epoxies in stock in Guwahati

Fischer FIS EM Plus 585 S · Hilti HIT-RE 500 V4 · Fischer FIS EM Plus 390 S

Where post-installed rebar is used

Slab and beam extensionsTying new concrete to an existing structure.
Column and wall starter barsWhere bars were missed, or the design changed after casting.
Retrofitting and strengtheningJacketing columns, adding shear walls and strengthening old buildings.
Staircases, balconies and canopiesCantilevers and add-ons fixed into finished concrete.

Why epoxy for rebar

  • Long working time – you can fill deep holes and set long bars before the mortar gels.
  • High bond strength – the choice for structural connections.
  • Wet holes – FIS EM Plus can be used even in water-filled holes.
  • Slow cure – plan for the curing time on the cartridge before you load the bar.

How to install

  1. Drill to the diameter and depth in the structural drawing.
  2. Blow, brush and blow the hole clean – dust is the main cause of weak rebar connections.
  3. Discard the first strokes from a new cartridge, then fill the hole from the bottom.
  4. Push the bar in with a slight twist and leave it untouched for the full curing time.

How many cartridges? Use our chemical volume calculator, or send the bar diameter, hole depth and number of holes on WhatsApp. Need test results for the consultant? We do on-site pull-out testing.

Read more: post-installed rebar guide · FIS EM Plus vs FIS V Plus

Frequently asked questions

Which chemical is used for rebar anchoring?

An epoxy injection mortar such as Fischer FIS EM Plus or a Hilti epoxy. Always follow the structural consultant's specification and the product approval.

Can I use a fast-curing vinylester mortar for rebar?

Rebar connections are normally designed with an epoxy. Vinylester mortars suit general anchoring where the fixing must take load quickly.

How many cartridges will I need?

It depends on the bar diameter, hole depth and number of holes. Use our chemical volume calculator or send the details on WhatsApp.

Can the hole be wet?

Only with a mortar approved for it. FIS EM Plus can be used in water-filled holes.

Are your products genuine?

Fasteners King is India's No.1 Fischer channel partner and an Authorised Hilti Channel Partner. Every order comes with a GST invoice.

Get a rebar chemical quoteOur Guwahati team replies during office hours (Monday to Saturday, 10 AM – 6 PM).WhatsApp Guwahati