Anchor Fasteners for Elevator & Lift Installation in Dubai

Guide-rail brackets, landing door frames and machine supports all hang on their anchors. Fasteners King supplies the wedge anchors and fast-curing chemical mortars that elevator installers use, from stock in Dubai.

VAT invoiceon every order
7 emiratesdelivery
24 hrsdispatch from PO*

*Subject to stock availability.

Which anchor for which part of the lift

Guide-rail bracketsWedge (bolt) anchors approved for cracked concrete, or a chemical anchor with threaded rod where edge distances are small.
Landing door frames and sillsWedge anchors or frame fixings, depending on the wall material.
Machine and controller supportsChemical anchors with threaded rods for the heavier loads.
Brick or hollow block shaftsInjection mortar with a perforated sleeve – tell us the wall type and we will suggest the system.

Why installers choose a fast-curing mortar

On a lift job the next step starts as soon as the bracket is fixed. A fast-curing vinylester mortar such as Fischer FIS V 300 T lets the bracket take load the same day, so the crew keeps moving. For the heaviest fixings an epoxy such as Fischer FIS EM Plus is the usual choice. See our FIS EM Plus vs FIS V Plus guide.

In stock in Dubai

Chemical mortars: Fischer FIS V 300 T · Fischer FIS EM Plus · Hilti HIT-HY 200 · Würth WIT-PE 510
Wedge anchors: Hilti HST4 · Fischer FAZ II Plus R

Three checks before you fix a bracket

  1. Use an anchor approved for cracked concrete – shaft walls crack slightly under load.
  2. Drill to the right diameter and depth, then blow, brush and blow the hole clean.
  3. Tighten wedge anchors to the installation torque, and let chemical anchors cure fully before loading.

To work out cartridges per shaft, use our chemical volume calculator.

Frequently asked questions

Which anchor is used for elevator guide-rail brackets?

Usually a wedge (bolt) anchor approved for cracked concrete, such as Hilti HST4 or Fischer FAZ II Plus, or a chemical anchor with a threaded rod. Always follow the elevator company's drawing and the anchor approval.

Why do elevator installers prefer a vinylester mortar?

Because it cures fast. The bracket can take load the same day, so installation is not held up waiting for the mortar.

Are your Fischer and Hilti products genuine?

Fasteners King is India's No.1 Fischer channel partner and an Authorised Hilti Channel Partner. Every order comes with a VAT invoice.

Can you supply for a whole project?

Yes. Send the number of lifts, floors and the bracket drawing on WhatsApp and we will quote for the full quantity.

How fast can you dispatch?

We dispatch within 24 hours of your purchase order, subject to stock availability. Freight is paid by the customer.

Get a quote for your lift projectOur Dubai team replies during office hours (Monday to Saturday, 9:30 AM – 6 PM).WhatsApp Dubai