Hilti logoAuthorised Hilti Channel Partner

Hilti HIT-RE 500 V4 Epoxy Chemical Anchor in Guwahati

Hilti’s top-performance epoxy injection mortar for post-installed rebar and heavy structural anchoring – genuine stock at our AT Road, Guwahati branch.

How many cartridges do you need? Use the free chemical volume calculator →

✔ Genuine stock at AT Road, Guwahati  ✔ GST invoice  ✔ Mon–Sat, 10 am – 6 pm

Hilti HIT-RE 500 V4 Epoxy Chemical Anchor – Guwahati
🏗️Rebar & heavy structural anchoring
✅ETA approved – incl. seismic C1/C2 & fire
💧Wet, water-filled & diamond-cored holes
🌿Styrene-free epoxy
📦330 ml & 500 ml packs

Where to use Hilti HIT-RE 500 V4

  • Post-installed rebar
  • Slab & wall extensions
  • Column & staircase starters
  • Steel baseplates & columns
  • Retrofitting & strengthening
  • Cracked concrete anchoring
  • Natural stone

Hilti HIT-RE 500 V4 – sizes & technical data

TypeInjectable epoxy mortar
Pack sizes330 ml and 500 ml foil packs
Use withHilti threaded rods (HAS / HIT-V), HIS-N internally threaded sleeves, rebar
Base materialConcrete (cracked & non-cracked), natural stone
Hole conditionDry, wet, water-filled, diamond-cored
ApprovalsETA for anchoring and post-installed rebar; seismic, fire and fatigue
In-service temperature−40 °C to +75 °C
Storage5 °C to 25 °C

Technical data as published by Hilti. Always design to the current approval and datasheet.

Pairs well with

Hilti HIT-V anchor rod
Hilti HIT-V anchor rod
Hilti HDM dispenser
Hilti HDM dispenser

Why buy Hilti HIT-RE 500 V4 from Fasteners King, Guwahati

Since 197946+ years in fasteners
12,000+customers served
7,000+projects supplied
98.4%on-time dispatch

Authorised Hilti Channel Partner. Genuine stock with GST invoice, supplied across Assam, Meghalaya, Nagaland, Manipur, Arunachal Pradesh and the rest of the Northeast.

DLF logoM3M logoSOBHA logo
Fasteners King store, AT Road, Guwahati

More from our Guwahati branch

FAQs

Can HIT-RE 500 V4 be used for rebar?

Yes. It is ETA-assessed for post-installed rebar connections, including fire and seismic conditions. Size and embedment should follow the approval or a PROFIS Rebar design.

How is it different from Fischer FIS EM Plus?

Both are top-end epoxy mortars for heavy loads and rebar. Choice usually depends on the project specification and approval required – WhatsApp us your drawing and we will suggest the right one.

Do you give a GST invoice?

Yes, every order from our Guwahati branch comes with a GST invoice.

Fasteners King – Guwahati branch

Ground floor, HB Plaza, Assam Trunk Road, near SBI Bank, AT Road, Guwahati, Assam 781001

📞 +91 90906 76969 · +91 60030 55647 · ✉️ Support@FastenersKing.com

🕘 Mon–Sat, 10 am – 6 pm (closed Sunday)