Authorised Hilti Channel PartnerHilti HIT-V Anchor Rod for Chemical Anchors in Guwahati
Hilti’s grade 5.8 threaded rod for HIT injection mortars – the steel part of your chemical anchor. Genuine stock at our AT Road, Guwahati branch.
✔ Genuine stock at AT Road, Guwahati ✔ GST invoice ✔ Mon–Sat, 10 am – 6 pm

Where to use Hilti HIT-V anchor rod
- With HIT-RE 500 V4
- With HIT-HY 200
- Steel baseplates
- Brackets & consoles
- MEP supports
- Concrete & masonry
Hilti HIT-V anchor rod – sizes & technical data
| Thread | Available |
|---|---|
| M8 | ✔ |
| M10 | ✔ |
| M12 | ✔ |
| M16 | ✔ |
| M20 | ✔ |
| M24 | ✔ |
| Material | Carbon steel, strength grade 5.8, zinc-plated (min. 5 µm) |
|---|---|
| Lengths | 110 mm to 1000 mm (ask for your size) |
| Base material | Concrete (cracked & non-cracked), solid & hollow masonry |
| Environment | Dry indoor |
| Drill size | Depends on the mortar – check the mortar table or ask us |
Technical data as published by Hilti. Always design to the current approval and datasheet.
Pairs well with


Why buy Hilti HIT-V anchor rod from Fasteners King, Guwahati
Authorised Hilti Channel Partner. Genuine stock with GST invoice, supplied across Assam, Meghalaya, Nagaland, Manipur, Arunachal Pradesh and the rest of the Northeast.




More from our Guwahati branch








FAQs
Which mortar should I use with HIT-V?
HIT-V works with Hilti HIT injection mortars such as HIT-RE 500 V4 and HIT-HY 200. Tell us the load and base material and we will suggest the right pair.
Which lengths do you stock?
Common lengths for each size are usually in stock. Tell us the size and length on WhatsApp and we will confirm availability in 5 minutes.
Do you give a GST invoice?
Yes, every order from our Guwahati branch comes with a GST invoice.
Fasteners King – Guwahati branch
Ground floor, HB Plaza, Assam Trunk Road, near SBI Bank, AT Road, Guwahati, Assam 781001
📞 +91 90906 76969 · +91 60030 55647 · ✉️ Support@FastenersKing.com
🕘 Mon–Sat, 10 am – 6 pm (closed Sunday)