Anchor Pull-Out Testing in Delhi

Need proof that the anchors on your site will hold? Fasteners King carries out on-site anchor bolt pull-out tests across Delhi NCR. We test with a hydraulic anchor bolt testing machine with a digital gauge, and you get a written report within 24 hours of the test.

Up to 30 kNtest load
Up to 20 mmanchor bolt size
24 hrsreport after testing
From ₹5,000testing charges

When you need a pull-out test

Consultant or client asks for itMany structural consultants want test results before they approve the fixing or sign off the handover.
Old or unknown concreteRetrofit and renovation jobs where nobody is sure how strong the base material is.
Safety-critical fixingsElevator brackets, facade and cladding supports, railings, pipe and duct supports.
Doubt about the anchor or the installationTo check that the right anchor was used and that it was installed correctly.

What we test

  • Mechanical anchors – wedge (bolt) anchors, sleeve anchors and drop-in anchors
  • Chemical anchors with threaded rods
  • Anchor bolt sizes up to 20 mm, with test loads up to 30 kN
  • Hilti, Fischer, FastenKing and other makes already installed on your site

How it works

  1. Send us the site location, anchor type and size, number of anchors to test and the load your consultant wants on WhatsApp.
  2. We confirm the charges and fix a date.
  3. Our team tests the anchors on site with the hydraulic tester and digital gauge.
  4. You receive the test report within 24 hours of testing.

Charges

Charges start from ₹5,000. The final amount depends on the site location and the number of anchors to be tested – share the details on WhatsApp for a quote.

Buying anchors as well?

Fasteners King is India's No.1 Fischer channel partner and an Authorised Hilti Channel Partner. Every order comes with a GST invoice. We stock Fischer FIS EM Plus 585 S · Hilti HIT-RE 500 V4 · FastenKing FK-360 Plus and Hilti HST4 · Fischer FAZ II Plus · FastenKing FK-TB in Delhi. To work out how many cartridges you need, use our chemical volume calculator.

Read more: anchor pull-out test guide · anchors for elevator installation · rebar anchoring chemical

Frequently asked questions

What is an anchor pull-out test?

It is an on-site test in which a hydraulic tester pulls on an installed anchor up to a set load, to confirm that the anchor and the base material hold that load.

What is the maximum load and anchor size you can test?

Our machine tests up to 30 kN and takes anchor bolt sizes up to 20 mm.

How soon do I get the report?

The test report is delivered within 24 hours of testing.

How much does a pull-out test cost?

Charges start from ₹5,000 and depend on the site location and the number of anchors. Send the details on WhatsApp for a quote.

Can you test anchors that were not bought from Fasteners King?

Yes. Tell us the anchor make, type and size when you book.

Which areas do you cover?

From our Delhi branch we cover Delhi, Noida, Greater Noida, Gurugram, Faridabad, Ghaziabad and the rest of North India. Share your site location and we will confirm.

Book a pull-out testOur Delhi team replies during office hours (Monday to Saturday, 11 AM – 7 PM).WhatsApp Delhi