FastenKing FK-360 Plus polyester chemical anchor 360 ml cartridge with mixing nozzle

FASTENKING CHEMICAL FK-360 PLUS

  • Polyester injection mortar – fast curing and economical
  • For threaded rods in non-cracked concrete and masonry, including perforated brick
  • Works in dry, wet and water-filled holes
  • Working time 5 min, load after 50 min at 20–24 °C
  • Threaded rod sizes M6 to M30
  • 360 ml cartridge with two mixing nozzles
₹710 + GST
Indicative price – prices may change without prior notice. WhatsApp for today's best price · bulk and project rates available.

GET A QUOTE

Share your details, and our experts will get back to you shortly.

Have a BOQ, drawing or site photo? Send it on WhatsApp – quote in 5 min. Or fill in the form below.

FASTENKING FK-360 PLUS is an economical, fast-curing polyester anchoring adhesive for fixing threaded rods in non-cracked concrete and masonry, including perforated brick.

It can be installed in dry, wet and water-filled holes made by hammer or compressed-air drilling, and takes medium to high static and quasi-static loads. Typical uses are handrails and fences, balcony parapets and canopies, machinery and racking, pipe and ventilation systems, masonry supports and facade elements.

The 360 ml cartridge is dispensed with a standard dispensing tool and comes with two static mixing nozzles. At 20–24 °C the working time is 5 minutes and the anchor can be loaded after 50 minutes. Threaded rod sizes from M6 to M30 are covered.

FastenKing FK-360 Plus – polyester chemical anchor

FK-360 Plus is a fast-curing, economical polyester anchoring adhesive for fixing threaded rods in non-cracked concrete and masonry.

  • Use it for: handrails and fences, balcony parapets and canopies, machinery and racking, pipe and ventilation supports, masonry supports and facade elements.
  • Base materials: non-cracked concrete, masonry and perforated brick.
  • Drill holes: dry, wet and water-filled; hammer or compressed-air drilled.
  • Loads: medium to high, static and quasi-static.
  • Threaded rods: M6 to M30.

Working and curing time

Base material temperature Working time Curing time (dry hole)
+5 to +9 °C 10 min 2.5 h
+10 to +19 °C 6 min 85 min
+20 to +24 °C 5 min 50 min
+25 to +29 °C 4 min 40 min
+30 to +34 °C 2 min 35 min

In wet or water-filled holes the curing time doubles.

Holes per 360 ml cartridge

Threaded rod M8 M10 M12 M16 M20 M24
Holes per cartridge 49 37 27 18 7 4

Technical data

  • Chemistry: polyester, grey colour
  • Compressive strength: 82 N/mm²
  • Service temperature: −40 °C to +80 °C (long-term up to +50 °C)
  • Shelf life: 18 months stored at about 22 °C
  • Packing: 360 ml cartridge, 12 per box
  • French VOC A+ rating

Download the FK-360 Plus technical data sheet (PDF)

For cracked concrete or post-installed rebar, ask us about epoxy mortars instead.