Cheap cladding clamps cost more later because they rust, stain the stone and can let panels loosen or fall. Replacing failed clamps on a finished façade means scaffolding, removing stone and re-fixing, often many times the price of good clamps. Stainless steel clamps in SS-304, or SS-316 near the coast, avoid that.

Why cheap clamps fail
- Mild steel or thin plating: rusts inside the joint where no one can see it
- Rust stains: streaks run down light-coloured stone and are hard to remove
- Thin sections: bend under the weight of the stone over time
- Poor finish: sharp edges or wrong slot sizes that crack the stone at the kerf
Why stainless steel pays off
- SS-304 resists rust in most inland exposures, such as Delhi NCR and Assam
- SS-316 is the safer choice for coastal sites in Dubai, Sharjah and Abu Dhabi
- No staining, so the façade stays clean
- Strength stays the same for the life of the building

The real cost comparison
Clamps are a small part of a cladding budget. Repairing a failed façade means access equipment, labour, broken stone and lost time. Saving a little per clamp is not worth that risk.
Read more: why stone cladding fails on buildings, the types of stone cladding clamps and why fasteners fail from corrosion.
Get stainless cladding clamps
Fasteners King has supplied anchors and fixings since 1979. We are India’s No. 1 Fischer channel partner (5 years in a row) and an Authorised Hilti Channel Partner, with stock in Delhi, Guwahati and Dubai. See our stone cladding clamps in SS-304, with SS-316 on request.