The main types of stone cladding clamps are the L clamp, Z clamp, L-T clamp and chair clamp, plus undercut anchors for thick stone. Each holds the stone in a different way, so the right one depends on where the panel sits and how far it stands off the wall.

L clamp
Fixed directly into concrete walls with a bolt. It supports the stone at the top or bottom edge and is the most common clamp for simple façades.
Z clamp
Its offset shape bridges a gap between the wall and the stone, useful where the wall is uneven or a cavity is needed. Ours is SS-304, with SS-316 on request.

L-T clamp
Sits at a horizontal joint and holds two panels at once: it supports the panel above and restrains the panel below.

Chair clamp
A stainless steel (A2 / A4) bracket for heavier stone where the clamp needs a wider seat.
Undercut anchors
Used for thick stone panels where the fixing goes into the back of the stone instead of the edge.
How to choose
- Stone weight and thickness
- Gap between wall and stone
- Wall material: concrete, brick or block
- Exposure: SS-304 inland, SS-316 for coastal sites
Read why stone cladding fails on buildings and why cheap cladding clamps cost more later. Near the coast, also read why fasteners fail from corrosion.
Get the right cladding clamps
Fasteners King has supplied anchors and fixings since 1979. We are India’s No. 1 Fischer channel partner (5 years in a row) and an Authorised Hilti Channel Partner, with stock in Delhi, Guwahati and Dubai. See our stone cladding clamps.