Good drilling tools matter because the anchor can only be as strong as the hole it sits in. A worn or underpowered drill makes oversize, off-angle or rough holes, and anchors set in them lose holding power. Professional cordless tools like Milwaukee’s M12 range give straighter, cleaner holes and repeatable torque.

How poor tools weaken anchors
- Wobbling chucks and worn bits make holes oversize
- Low hammer energy leaves rough, uneven hole walls
- Weak batteries tempt labour to drill shallow
- No torque control means anchors are over- or under-tightened
What to look for in a drilling tool for anchors
- SDS-plus hammer action for concrete
- Depth stop to control embedment
- Steady power across the battery charge
- Dust extraction where available, which also helps hole cleaning
Torque control matters too
Anchors have a specified installation torque. Too little and the anchor won’t set; too much and it can crack the concrete or break the resin bond. A digital torque wrench removes the guesswork.

Keep tools in working order
- Check the chuck and bit holder every day
- Replace carbide bits when they wear
- Clean dust from vents after each shift
- Store batteries charged and out of the sun
Read how drilling accuracy affects anchor strength and the most common power tool mistakes on site. Even with good tools, installation mistakes can undo the job.
Get Milwaukee tools with your anchors
Fasteners King has supplied anchors and fixings since 1979. We are India’s No. 1 Fischer channel partner (5 years in a row) and an Authorised Hilti Channel Partner, with stock in Delhi, Guwahati and Dubai. See our Milwaukee tools range.