How Do You Use Chemical Anchors? A Step-by-Step Guide

A chemical anchor holds a threaded rod or rebar in a drilled hole with a two-part resin mortar. Once cured, the resin bonds to both the concrete and the steel, so the load spreads along the full depth of the hole. That is why chemical anchors are used for heavy loads, close to edges, and for rebar connections. This guide covers the basic steps for any brand.

FastenKing FK-360 Plus chemical anchor cartridge
FastenKing FK-360 Plus chemical anchor cartridge

When to use a chemical anchor

  • Heavy or safety-critical loads such as steel structures, façade brackets and machinery
  • Anchors close to an edge or close together, where an expanding anchor could crack the concrete
  • Adding new rebar to an existing slab, beam or column
  • Hollow blocks and brick, using a mesh sleeve with a suitable mortar

Not sure if you need chemical or mechanical? Read chemical vs mechanical anchors: which should you use.

How to install a chemical anchor in 7 steps

  1. Drill the hole to the diameter and depth given in the product data sheet.
  2. Clean the hole: blow out, brush with a steel brush, blow out again.
  3. Waste the first mortar from a new nozzle until the colour is even.
  4. Fill about two-thirds of the hole, starting from the bottom.
  5. Insert the rod with a slow twist until a little mortar comes out at the top.
  6. Wait for the full curing time printed on the cartridge. It is longer in cold weather.
  7. Tighten with a torque wrench to the value in the data sheet.
FastenKing chemical dispenser gun
FastenKing chemical dispenser gun

Which resin type?

  • Polyester: light to medium loads, mostly in masonry
  • Vinylester: general-purpose use in concrete and masonry
  • Epoxy: heavy loads, rebar, deep holes and damp holes, with a longer working time

For brand-specific steps, see our Hilti chemical anchor installation guide. To understand why resin anchors are now so common, read why chemical anchors are used so widely in construction.

Buy chemical anchors with expert advice

Fasteners King has supplied anchors and fixings since 1979. We are India’s No. 1 Fischer channel partner (5 years in a row) and an Authorised Hilti Channel Partner, with stock in Delhi, Guwahati and Dubai. See our chemical anchors in Delhi NCR, or message us on WhatsApp with your load and base material.